MCT-501 הינו גלאי שבר זכוכית אלחוטי דיגיטלי המעוצב לשימוש בסביבה ביתית ומסחרית, היכן שנדרש איתור מהיר של שבירת זכוכית.
MCT-501 פועל באמצעות טכנולוגיה מתקדמת מוגנת פטנט לזיהוי אקוסטי, אשר יכולה להבחין בין אזעקת אמת לאזעקת שווא. הגלאי מספק טווח גילוי של 360 מעלות בגובה של עד 66 מטרים ומבחין בין שבירת סוגים שונים של זכוכית (חלקה, משוריינת, רבודה או זכוכית מרושתת).
הגלאי מתריע כאשר הסוללה חלשה, ומשדר למערכת האזעקה בטווחי זמן קבועים, על מנת לוודא את תפקודו האמין בכל עת. הגלאי הינו קל להתקנה, עומד בסטנדרטים בינלאומיים ומאושר לשימוש ברוב המדינות.
מודול חיישן אקוסטי של 501-MCT הוא כלל כיווני ומספק כיסוי בזווית של 360 מעלות.
כיסוי נמדד מהחיישן לנקודה על הזכוכית הרחוקה ביותר מהחיישן (ראה איור)
אפשר להתקין את החיישן קרוב כמטר אחד מהזכוכית
PowerCode Transmitter
The acoustic sensor shares its housing with a miniature
transmitter which has a unique 24-bit PowerCode ID, selected in
the factory from over 16 million possible code combinations.
Upon alarm (glass break detection), a digital message is
transmitted, composed of the PowerCode ID followed by various
status and message-type markers. Alarm and other data are thus
forwarded to the wireless alarm control panel.
Since transmitted messages might collide with transmissions
from other PowerCode transmitters used in the system, a smart
anti-collision transmission sequence is used.
The MCT-501 is protected by a tamper switch that is activated
when the cover is removed. In a tamper situation, a message is
transmitted with the “tamper alert” marker ON.
A periodic supervision message, distinguished by a specific
marker, is transmitted automatically once in 60 minutes. The
wireless control panel is thus informed, at regular intervals, of the
sensor’s active participation in the system.
A red LED mounted on the transmitter PCB (visible only when the
cover is off) lights whenever alarm or tamper events are reported.
The LED does not light while a supervision message is being
transmitted.
Operating power is obtained from an on-board 3.6 V Lithium
Thionyl Chloride battery. A weak battery will cause a “low battery”
marker to be added to any message transmitted.