FH-Series R

המחיר שלנו

מחיר משלוח: דואר שליחים עד 5 ק"ג: ₪50

התמונות באתר להמחשה בלבד

יש לעיין במפרט טכני יצרן

תיאור

FH-Series R

The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.

RAPID DETECTION AND VISUAL VERIFICATION

Integrates a high-resolution thermal and visible sensor for hot-spot detection and visual verification from a single device
INTELLIGENT ALARMS

Detect hot spots and intruders without false alarms with on-board video analytics; make detections based on time of day, business hours, and seasonality using the built-in scheduling tool
EASY INTEGRATION

Deploy the FH-Series R as part of a Teledyne FLIR end-to-end solution or in combination with preferred third-party solutions

SPECIFICATIONS

GENERAL

Dimensions (L x W x H): 314 x 233 x 124 mm/12.4" x 9.2" x 4.9"

Power Consumption: Nominal: 15 W Heaters enabled, 12 VDC: 48 W Heaters enabled, all other inputs: 70 W

Surge Immunity on AC Power Lines: EN 50130-4

Surge Immunity on Signal Lines: EN 50130-4

COMPLIANCE & CERTIFICATIONS

Approvals: FCC Part 15 (Subpart B, class A), CE Marked

Certifications: IEC 62368, UL Listed

Compliance: RoHS, WEEE

ENVIRONMENTAL

Humidity: 0-95% relative humidity

IP Rating (dust & water ingress): IP66 & IP67

Operating Temperature Range: -40°C to 70°C/-40°F to 158°F

Shock: IEC 60068-2-27

Storage Temperature Range: -50°C to 85°C/-58°F to 185°F

Vibration: IEC 60068-2-64

MEASUREMENT & ANALYSIS

Analytics Features: Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Tampering, Loitering, CNN classifier

Analytics Management: Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control

Measurement Accuracy: Target below 100 °C (212 °F): ± 5 °C (±9 °F) accuracy Target below 150 °C (302 °F): ± 5% accuracy Target above 150 °C (302 °F): ± 15% accuracy *Measured at 25°C ambient temperature. Error may be greater at extreme temperatures

Object Temperature Range: High Gain Mode: 0°C to +160°C Low Gain Mode: 0°C to +600°C

SYSTEM INTEGRATION

Control Input/Output: Input: two dry alarm contacts Output: two relay contacts 1A max at 24 Vac/30 Vdc Configurable between normally open and normally closed

Ethernet: 100/1000 Mbps

External Analytics Compatible: Yes

Network APIs: NEXUS® SDK NEXUS® CGI ONVIF Profile S, G, T

Streaming Resolution: Primary Stream: Thermal: QVGA (320 x 256) Visible: 4k (3840 x 2160), 1080P (1920×1080), 720P (1280×720) & VGA 640×480 Secondary Stream: Thermal: QVGA (320 x 256) Visible: 1080P (1920×1080), 720P (1280×720) & VGA 640×480

Supported Protocols: IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X, ONVIF

Video Over Ethernet: Two independent channels of H.264/H.265 or M-JPEG (except 4k) for visible and thermal

THERMAL CAMERA

Array Format (Thermal): 320 × 256

Detector Pitch (Thermal): 17 µm

f number (Thermal): f/1.1

Field of View (FOV) (Thermal): 13° × 10°

Image Uniformity Optimization: Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers

Spectral Range (Thermal): 7.5 µm to 13.5 µm

Thermal AGC Modes: Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting

Thermal AGC Region of Interest [ROI]: Default, Presets and User definable to insure optimal image quality on subjects of interest

Thermal Sensitivity – NETD (Thermal): <35mK @ 25°C F# 1.0

Video Frame Rate (Thermal): NTSC: 30 Hz or PAL: 25 Hz / 8.3 Hz

VIDEO & RECORDING

Composite Video NTSC or PAL: Hybrid system with IP & analog video

Local Storage: Support for SD Card (not supplied)

VISIBLE CAMERA

Array Format (Visible): 4K 2160p (3840 x 2160)

f number (Visible): 1.8

Field of View (FOV) (Visible): 18° × 10°

Video Frame Rate (Visible): 30 Hz or less

Export Restrictions

The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.

Downloads

Video

מידע נוסף

Manufacturers	Teledyne Flir
Dimension	314 x 233 x 124 mm/12.4" x 9.2" x 4.9"
Power Consumption	Nominal: 15 W Heaters enabled, 12 VDC: 48 W Heaters enabled, all other inputs: 70 W
IP Rating (dust & water ingress)	IP66 & IP67