Wall mounting amplifier with VGA I/O and display ON/OFF IR control.
Sound Field series for high quality sound and perfect intelligibility.
Ideal for educational and presentation markets.
Stereo class D amplifier:
25W RMS per channel.
THD: <0.01%, 20Hz-20KHz at 10W RMS in to 8OHM load.
External speaker connection via terminal blocks.
Terminals are located inside the wall tunnel.
Inputs:
Computer (or another) audio line level source via 3.5mm stereo socket, located on control panel. Level control of line level is located on panel too.
Auxiliary line input for audio source with internal block connection for hidden wiring. Level control is done in the audio source.
Microphone input provided either via hidden connection (to a podium microphone, wireless receiver as UMT 5100/5200 series and so on) or, via XLR socket which should be installed in the ready hole.
In case the panel XLR size hole is not in use for microphone, any special request XLR size device, as USB, RCA video, VGA or HDMI, can be installed.
Bass & Treble tone controls are provided for the line level and a master volume controls all 3 inputs. Internal tone controls will not influence microphone in order to keep intelligibility.
VGA In/Out connection for convenient installation: Direct hidden cable towards display.
Massive vandal proof enclosure with special Hex screws to prevent unwanted release (wall mounting special screws are provided as well).
IR learning device with vandal proof switch in order to control ON/OFF of projector/display.
Dimensions: 96mm X 180mm X 96mm.
UMT |
