The Axis single input and relay output modules are loop powered and designed around a fully digital protocol. Each module allows monitoring of fire alarm and auxiliary devices and provides form C changeover contacts for control of auxiliary devices such as fire shutters.
The input channel is monitored and will detect Normal / Short / Alarm and Open conditions. The output channel is a normally de-energised relay switched on by a command from the control panel.
The unit provides fast alarm and fault signalling, and incorporates a bidirectional short circuit isolator.
Connections are made using plug-in terminal blocks which will accept conductors up to 2.5mm².
The unit can be mounted within an electrical box or enclosure.
Specification | |
Power Supply | 15-40 V |
Average Current Consumption | I=120 uA |
LED Current Consumption | Iled=6mA @24Vdc |
Operating Temperature Range | -30°C / +70°C |
Humidity (non condensing) | 95% RH |
Nominal Relay Switching current | I=2A V=30Vdc |
End-of-line resistor | (Reol): 27Kohm |
Alarm resistor | (Rw): 10Kohm |
Dimensions H x W x D mm | 52 x 75 x 28 w/o brackets |
Weight grams | 180 |
IP Rating | 21C |
20-VMMIC120-ADV: | Mini Single Input and Single Relay Output Module |
advancedco |