High power, current driven amplifier
Two microphone/line inputs, one priority input (100 V)
Selectable frequency range and tone controls
Limiter and automatic gain control (AGC)
Integrates in an EN 54‑16 and EN 60849 compliant system
Mains power supply | |
Voltage | 230/115 VAC, ±10%, 50/60 Hz |
Inrush current | 7 A at 230 VAC / 14A at 115 VAC |
Max power consumption | 500 VA |
Performance | |
Output current | 10 A |
Frequency response | 50 Hz to 10 kHz (+1/-3 dB at -10 dB ref. rated output) |
Distortion | <1% at rated output power, 1 kHz |
Bass control | -8/+8 dB at 100 Hz |
Treble control | -8/+8 dB at 10 kHz |
Mic/line input | 2 x |
Connector | 3-pin XLR, balanced mic/line level (switchable) |
Sensitivity | 1 mV / 1 V (mic/line) |
Impedance | >1 kohm |
Dynamic Range | 100 dB |
S/N (flat at max volume) | 75 dB |
Headroom | 25 dB |
Phantom power supply | 16 V (switchable) |
VOX functionality | Input 1 (switchable) mutes input 2 |
VOX sensitivity | -10 dB ref nominal input |
Priority input | |
Connector | Screw |
Sensitivity | 100 V, transformer balanced |
Impedance | >100 kohm |
S/N (flat at max volume) | 63 dB |
Headroom | 25 dB |
Pilot tone detection | -20 dB, ref 100 V (10 V) |
Pilot tone threshold | -26 dB, ref 100 V (5 V) |
Master input* | 1 x |
Connector | 1/4" TS jack |
Line output | |
Connector | 3‑pin XLR, balanced |
Nominal level | 1 V |
Impedance | 200 ohm |
Loop output | |
Connector | Screw |
Slave output | (for master input of other PLN-1LA10) |
Connector | 1/4”TS jack 0° to 90° |
Fault Relay | |
Connector | Screw |
Contacts | 100 V, 2 A (voltage free, SPDT) |
Dimensions (H x W x D) | 94 x 430 x 320 mm (19" wide, 2U high) |
Weight | Approx. 11.6 kg |
Mounting | Stand-alone, 19" rack |
Color | Charcoal |
Operating temperature | -10 ºC to +55 ºC (14 ºF to +131 ºF) |
Storage and transport temperature | -40 ºC to +70 ºC (-40 ºF to +158 ºF) |
Relative humidity | <95% |
Acoustic noise level of fan | <35 dB SPL at 1m, temperature controlled |