Conventional flush-mount magnetic contact
VdS class C
Tamper switch
Head-on or parallel flush mounting
Conventional perimeter protection
| Maximum permissible contact load in W | 3 |
| Minimum switching current in mA | 0.01 |
| Maximum switching current in mA | 100 |
| Maximum switching voltage in VDC | 30 |
| Minimum switch tolerance | 107 |
| Installation type | Flush, parallel or head-on |
| Contact | Normally open / toggle switch |
| Magnet | AlNiCo 500 |
| Dimension in cm (Ø x D) (switch) | 0.8 x 3 |
| Dimension in cm (Ø x D) (magnet) | 0.8 x 2 |
| Minimum axial installation distance in cm | 0.5 |
| Maximum axial installation distance in cm | 1.2 |
| Cable type | LiYY-ZGL 4 x 0.14 mm, suitable for LSA-PLUS insulation displacement technology |
| Cable length in m | 6 |
| Minimum operating temperature in °C | -25 |
BOSCH |
|
גלאי אזעקה קווי /אלחוטי |
גלאי אזעקה קווי |
