Description
This Microwave detector is useful for High security purpose.
There is no effect by Fog, Sun or Car light and the combination with Beam detector achieves higher performance.
(1) Less than 1m width of detection-zone from the axis between Transmitter and Receiver.
(2) Operating frequency: 24GHz (K band)
(3) Easy graphical programming interface by PC, Tablet
(4) Addressable (max: 256 channels)
(5) 250 operating frequencies, in 1MHz steps
(6) Digital settings and operation
(7) Temperature : -40 ℃ – +65 ℃
Model | MW100K | MW200K | MW300K |
Input voltage | DC12V – 36V | ||
Current draw | 12V/24V/36V | ||
а) transmitter unit | 128mA/61mA/56mA | ||
b) receiver unit | 170mA/85mA/ 56mA | ||
Detection range | 100m | 200m | 300m |
Operation temp & humidity | – 40℃ – +65℃ RH95% or less | ||
Operating frequency | 24.001-24.250 GHz | ||
Selectable Frequency | 250 ch | ||
Selectable network address | 256 ch | ||
Signal level at the rated distance | 8 dB | ||
Detection zone height MW200K | 6.56ft / 2.0 m | ||
Detection speeds | 1.64 / 6.56 / 32.81 ft./s | ||
0.5 / 2 / 10 m/s | |||
Recovery time after notification of an alarm | 10 s | ||
Parameters of signal, switched with the contacts of the output circuit: | |||
– maximum current, constant or alternate | 30mA | ||
– maximum amplitude voltage | 72V | ||
Relay contact signal parameters: | |||
– maximum input resistance of the circuit | 5 Ω | ||
– impulse voltage | 10-30 V | ||
– maximum impulse duration | 0.5 s | ||
Signal duration | 5 s | ||
Overall dimensions of | 3.9×9.1×7.1 in./ | ||
unit with bracket: | 100x230x180 mm | ||
Weight of the packaged detector | 4 Lbs./1.8 kg |
ATSUMI |