Class D modern amplifier with over 6A peak current and High Voltage (over 15V Peak), low distortion driving system.
The high efficient Class-D amplifier has low heat dissipation and will function over twice time on Batteries than traditional Amplifier at same conditions.
2 Microphone inputs enable use from 2 counters or lecturers. One high Quality Uni Directional goosenecks.
Microphone is supplied as part of the system.
Line / AUX input for any kind of Playback or external source.
Separate level control for all inputs.
Integral filters for the defined 100-5kHz + Low and High Speech Tone controls.
Up to 200m2 Perimeter Loops area coverage.
Up to 2.4 meter distance on axis coverage by the integral, provided Loop. The loop can be installed or attached to amplifier as desktop with adjustable splay angle for maximum efficiency when directed to needed listeners location.
Compact design mounting / desktop unit with integral or remote counter loop.
Digitally controlled AGC / Compressor optimized for speech frequencies with unmatched intelligibility & capable of narrow band quality musical reproduction.
Internal power supply ensures switching off any contact to Mains according to safety laws for critic use (in contrary to 24/7 mains wall power supplies).
Status monitoring of power, incoming audio and loop driving.
High quality Hearing / Monitor speaker with volume control and hanging device supplied. As part of the system.
High quality and powerful Counter Mobile / Desktop or Installed system.
Small Halls, Class / Meeting / Court Rooms when driving an external Loop.
INPUTS
|
|
Power
|
35W 100-240VAC nominal, 50/60Hz
Power switch + Fuse on front panel
Power switch for Battery (Mobile or Emergency operation)
|
2 Microphones
|
Electret Cartridge phantom power supplied
Uni Directional, Gooseneck type Microphone with 2.4 m cable supplied with system
|
Line (AUX)
|
3.5mm stereo jack socket, Line sensitivity; -40dBu + level control
|
OUTPUTS
|
|
Loop Output Drive Voltage
|
10.8VRMS (15.2Vpk) at maximum output current
|
Loop Output / Drive Current
|
4.32ARMS (6.1Apk) up to 60 seconds continuous 1kHz sine
Cont. pink noise 3.6ARMS. Short term peaks >8A
Level controlled via front panel
Drive current / operation indicated on 2-LEDdisplay in 10dB increment
|
Integral Loop
|
360mm Circular or Rectangular with adjusting splay angle or external install ability
|
Loop Connectors
|
Terminal Block, accept 0.5 to 1.5mm2
|
Loop Monitor / Hearing Aid Speaker
|
Provides access to hear or monitor actual loop via a
Mono headphone Speaker vi the connector on front panel
Speaker with Volume control and hang / install hook provided with the system.
Maximum of 3m spring cable ensure compatibility for maximum of applications
|
Internal Li Batteries supplied with integral Charger and Switch to ensure use of Batteries only when required.
|
AUDIO SYSTEM
|
|
Frequency Response
|
|
Distortion
|
THD+N <0.3% 1kHz sine at full current
|
Digitally controlled AGC / Compressor. Dynamic range >38dB
|
|
Indicators
|
Indicators on the front panel;
Normal Audio presence + Clipping – delivering over the rated voltage
|
Indicators on the back panel; "Power On" + " Audio in Loop"
|
PHYSICAL
|
|
Sizes
|
Amplifier (without handle): Width 360mm Depth 168mm Height 54mm, with handle 88mm.
With Loops: Width 360mm Depth 216mm Height 360mm
|
Mounting Options
|
Desktop: Mobile or attached.
Wall, under table, ceiling installation with 4 screws. Side hanged on 2/4 screws.
|
2.88kg
|
|
Environment
|
IP20 rated; 18 to 92% relative humidity; 0 to 45ºC
|
UMT |