שער גילוי רב אזורים מסוג פנלים, כולל תא פוטו אלקטרי לספירת נכנסים.

• High Level of Detection Uniformity
• High Discrimination
• Highly Visible Double Display provides single or multiple location of metal objects in transit
• Very High Speed of Detection
• High Immunity to External Interferences
• Direct Selection of the International Security Standards
• High Reliability
• Local or Remote Programming with Networking Capabilities

The HI-PE Multi Zone is a high performance walk-through metal detector which exceeds all International Security Standards. A “height on person” display actually indicates, by means of illuminated LED?s, the position of the weapon on the person.

Three operating modes are available: Floating (standard), the location zones are not fixed, as in the case of metal detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones, the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.

HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector. The detector?s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.

The HI-PE Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.

Main features

• Immediate selection of International Security Standards.
• Detection of magnetic, non-magnetic and mixed alloys metal weapons.
• All functions programmable and controlled by a microprocessor.
• Programming: via built-in keypad and display or RS232 serial connection to Remote Control Unit (RCU), a PC or a computer network.
• Programming access protected by both a mechanical lock and by two alphanumeric passwords.
• High speed of detection: up to 45 ft/s (15 m/s).
• Very high immunity to electromagnetic and mechanical interference.
• Automatic synchronization between two or more metal detectors, at a distance of up to 2 inches (5 cm), from each other, without using cables.
• Professional high integration and high reliability electronics.
• Control unit incorporated into the detector.
• No initial or periodic calibration.
• Easy maintenance: modular control unit for a rapid replacement.
• Colour: light grey RAL 7040.

Installation Data

• Power Supply:
  115 / 230 VAC, +10/-15%, 50 ÷ 60 Hz, 30 VA max
• External interface: RS-232C for connection to a Remote Control Unit (RCU), a terminal, a computer, an external modem or other CEIA Metal Detectors
• Operative temperature:
  from 14?F (-10?C) to 149?F (+65?C).
• Relative humidity: from 0 to 95%
  (without condensation).Certification and Conformity
  • Complies with Regulations relating to pacemakers, defi brillators or other vital support systems, pregnant women and magnetic storage media (fl oppy disks, audio cassettes, video cassettes and similar).
  • Conforms to the current International Security Standards for Walk-Through Metal Detectors.
  • Complies with EC Regulations and International Standards relating to Electrical Safety

  Alarms
  VISIBLE SIGNALS

• Multi-zone display bar for “height on person” localization.
• High intensity display.
• Green and red metering signals proportional to the mass of the object detected.AUDIBLE SIGNALS
• High acoustic intensity alarm signal.
• Volume and tone of alarm signal can be programmed.Accessories / Options
  • Photocell transit counter and automatic alarm rate calculation.
  • Remote Control Unit (CEIA RCU) with 65.6 ft (20 m) of connection cable.
  • Outdoor Version (IP55).
  • Test samples.
  • External Main Battery Supply Unit MBSU-1, including emergency batteries and automatic charger, providing about 8 hours of independent operation.
  • MD Scope: software for oscilloscope simulation and terminal operation on CEIA Metal Detectors.
  • Ethernet Network Controller for CEIA Metal Detectors.