סדרת InfinityTM VX מספק פונקציות זיהוי
אמין מאוד
צמצום דיווחים כוזבים או דו"ח הפסדים.
12 מ ' 90 מעלות גילוי דפוס מתכוונן ל 5 טווחים
SMDA פיצוי טמפרטורה מתקדם חסינות רעש הסביבה
מסיכה קלה למניעת דליפת יתר
סיכוך כפול מוליך כנגד הפרעות אור בהיר
Conduit / TX – מארז סוללות עבור דגמים קווית ואלחוטית
BATTERY OPARATED OUTDOOR PIR DETECTOR
The VX InfinityTM series provide highly reliable detection functions, reducing false reports or report losses.
The VX InfinityTM series deliver stable detection performance even in severe outdoor environments.
12 m (40 ft.) by 90 degree flexible detection pattern adjustable to 5 ranges
SMDA logic for advanced temperature compensation and environmental noise immunity
Easy masking for over spill prevention
Double conductive shielding against bright light disturbance
Conduit/TX-battery case for both wired and wireless-ready models
Model | VXI-R |
Detection method | Passive infrared |
PIR coverage | 12.0 m (40 ft) wide / 16 zones |
PIR distance limit | 12 – 2.5 m (5 levels) |
Detectable speed | 0.3 – 1.5 m/s (1 – 5 ft/s) |
Sensitivity | 2.0°C (3.6°F) at 0.6 m/s (2 ft/s) |
Power input | 3 – 9 V DC(Lithium or Alkaline Battery) |
Current draw | 9μA (standby) / 4 mA (max) at 3 V DC |
Alarm period | 2.0 ±1 sec. |
Warm-up period | Approx. 60 sec. (LED blinks) |
Alarm output | N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max) |
Trouble output | N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max) |
LED indicator | Disable: During normal operation. Enable: During WALK TEST or LED SW on. Red: Warm-up, alarm, masking detection (VXI-RAM only) |
RF interference | No alarm 10 V/m |
Operating temperature | -20 – +60°C (-4 – +140°F) |
Environment humidity | 95% max. |
International protection | IP55 |
Mounting | Wall, Pole (Outdoor, Indoor) |
Mounting height | 0.8 – 1.2 m (2.64 ft – 3.94 ft) |
Weight | 500 g (17.7 oz.) |
Accessories | Connector for POWER and ALARM, Connector for TROUBLE, Screw (4×20mm) ×2, Masking seal ×3 |
VXI-T-Bracket | |
*VXI-DAM and VXI-RDAM can not be used due to microwave interference. |
BATTERY BOX (RBB-01) | |
*Battery not included.CR123A x 3(3.0VDC) CR2 x 3(3.0VDC) 1/2AA x 3(3.6VDC) 1/2AA x 6(7.2VDC x 3)* |
Optex |