CURTAIN PIR AND GLASS BREAK DETECTOR
PATROL-601 is a combination of 2 detectors in one.
PATROL-601 incorporates two cutting edge intrusion detection technologies
by PIR detector and glass break detector.
PATROL-601 has two microphones for the frequency separation of sound
signals: Shock /Glass breakag.
ADVANTAGES
QUAD PIR SENSOR
PATROL-601, equipped with QUAD PIR sensor, eliminates undetectable zones and ensures the best detection of the infrared energy radiating from the moving intruder in an alarm protected area.
EXCEPTIONAL DIRECT AND REFLECTED LIGHT PROTECTION
PATROL-601 is equipped with the original Fresnel lens made of "POLY IR", which enables the best penetration of infrared energy and exclusion of false alarms resulting from exposure to direct or reflected sunlight or car headlights.
TWO MICROPHONES FOR FREQUENCY SEPARATION OF ACOUSTIC SIGNALS: SHOCK / GLASS BREAKAGE
The usage of two microphones in the PATROL-601 allows to separate high-frequency and low-frequency components of the acoustic signal, thus significantly to increase the selective sensitivity of the acoustic detector, to enlarge the detection range and to detect the real glass breakage only.
TWO TEST MODES: GLASS TEST AND SHOCK & GLASS TEST
There are 2 test modes for the glass break detector testing:
Test and adjustment of the high frequency channel – "GLASS TEST".
Complete test of the glass break detector – "SHOCK & GLASS TEST".
TWO SENSITIVITY REGULATORS
The PATROL-601 sensitivity regulators adjust the PIR detector and the glass break detector sensitivity according to the certain surround conditions, thus increasing the PATROL-601 resistance to all kinds
of environmental disturbances.
TWO OPTOELECTRONIC RELAYS
Two independent optoelectronic relays of the PIR detector and the glass break detector allow connecting the PATROL-601 to two independent zones in the control panel.
The reliable electronic circuit protection by RF and EM filters.
MECHANICAL PROTECTION OF PYROELECTRIC SENSOR
The PIR sensor of the PATROL-601 is protected from RF interference by nickel stay.
BIPOLAR PULSE COUNTER
The algorithm, based on bipolar pulse counting, allows the detector to be adapted to various objects with complex operational conditions, such as industrial plants, supermarkets, storehouses and hangars.
PATROL-601 – UNPRECEDENTED DOUBLE PROTECTION AND STYLISH DESIGN – IS A CHOICE OF PROFESSIONALS
DOWNLOADS
SPECIFICATION
| Detection speed range: | 0.2 – 3.0m/sec; |
| Power input: | 8.5 – 16VDC; |
| Current consumption: | |
| In stand-by mode: | 20mA; |
| In alarm mode with LED on: | 21mA; |
| In alarm mode with LED off: | 16mA; |
| Pulse mode: | 1,2; |
| Alarm period: | 3sec; |
| PIR detection range: | 15meters; |
| Glass break detection range: | 15m x 180º; |
| Installation height: | up to 10meters; |
| Relay output: | NC; 60V; 120mA; 16Ω; |
| Warm up period: | 50sec; |
| Reset time: | 5±1sec; |
| Light immunity: | no less than 10000Lux; |
| Opening protection: | TAMPER SWITCH; |
| Operating temperature range: | -30ºC +50ºC; |
| Storage temperature range: | -50ºC +80ºC; |
| RFI immunity: | 30V/m at a frequency range 10MHz – 1000MHz; |
| EMI immunity: | 50000V; |
| Dimensions: | 75mm x 66mm x 49mm; |
| Weight: | 106gr. |
GSN Electronics |
